바로가기 메뉴
컨텐츠바로가기
주메뉴바로가기
하단메뉴바로가기


홈 > Shopping Mall

접촉식 3차원 측정기-추가

 
접촉식3차원측정기 Hera
판매가 별도문의
적립금 0
배송비 결제금액150,000원이상 무료배송
규격 700mm x 700mm x 500mm
납기일 90일납품
제조사/원산지 Coord3/이탈리아
브랜드 Coord3
수량
plus minus
총금액 : 1원
 The COORD3 HERA series of medium measuring volume bridge DCC air bearing bridge configuration CMM’s offer advanced measuring platforms with integral dovetail Y axis machined directly into the granite plate providing the ultimate in stable metrology performance. The COORD3 HERA CMM offers improved performance over the COORD3 ARES model CMM and can be equipped with Renishaw touch or scanning probes and are suitable for all applicable manufacturing measuring applications. Available with a CMM bridge width of 700 the HERA Bridge range offers a comprehensive series of CMM model sizes to accommodate your specific measurement requirement.

The HERA Bridge CMM is available in two performance levels.

 

 

 Standard and NT High Performance models

The NT model has a silicon carbide Z axis column increasing the overall stiffness of the measuring platform and providing an outstanding CMM system for high accuracy metrology applications utilizing the full range of Renishaw scanning technologies.

Ultra rigid alloy CMM platform provides maximum stiffness for scanning applications

  • Rapid thermal diffusion by CMM frame when environment conditions change
  • FEA designed bridge beam extrusion provides optimum moment of inertia for minimum deflection when operating at high accelerations
  • One piece granite base plate with integral Y dovetail guide-way improves repeatability and accuracy
  • M8 threaded table inserts on 300 x 300mm grid
  •  

  • Rigid air bearings to all axes with wide bearing spread ratios
  • Pneumatic Z axis counter balance
  • Renishaw 0.1 micron resolution measuring scales incorporating dynamic signal processing
  • Full digital motion control with probe path blending for optimised CMM performance
  • Zero hysteresis vibration free toothed drive belts to all axes
  • Passive vibration damping system isolates external vibrations
  • Open access to CMM measuring area from all sides
  •  

  • Maximum Positioning Speed 867mm/sec
  • Maximum Acceleration 2500mm/sec2 | NT version 2000mm/sec2
  •  

     

    COORD3 NT Model Enhanced Features

    • Silicon Carbide Z axis column enhancing further CMM stiffness
    • 0.1 micron resolution Renishaw TONiC measuring scales
    • Dynamic thermal compensation system including part sensor

    COORD3 Hera Medium Bridge CMM’s are available
    with the following measuring strokes:

     

     

    HERA   7.7.5:  700mm x 700mm x 500mm

    HERA   7.7.7:  700mm x 700mm x 700mm

    HERA 10.7.5: 1000mm x 700mm x 500mm

    HERA 10.7.7: 1000mm x 700mm x 700mm

    HERA 12.9.7: 1200mm x 850mm x 700mm

    HERA 15.9.7: 1500mm x 850mm x 700mm

    HERA 18.9.7: 1200mm x 850mm x 700mm

    HERA 12.10.9: 1200mm x 1000mm x 850mm

    HERA 15.10.9: 1500mm x 1000mm x 850mm

    HERA 18.10.9: 1800mm x 1000mm x 850mm

    HERA 20.10.9: 2000mm x 1000mm x 850mm

     

    Environment

    • Nominal Temperature 20 °C
    • Allowable Temperature Range: 18 – 22 °C (Extended Range 16 – 26 °C)
    • Temperature Gradient:  0.5° C/hour – 2° C/day – 0.5° C/meter (Extended Range 5° C/day – 1.0° C/meter)
    • Operating Temperature Range: 15 – 35 °C
    • Relative Humidity 40 – 80% (non condensing)
    • Acceptable Vibrations: 30mm/ sec2 1-10Hz | 15mm/ sec2 10-20Hz | 50mm/ sec2 20-100Hz

     

    Services

    • Minimum Air Supply 5 Bar -72PSI
    • Air Consumption 110Nl/min (136Nl/min on 900/1000mm bridge models)
    • Power Supply Voltage 230v 50Hz or 110v 60Hz (+/- 2% single phase)
    • Maximum Power Consumption 10A 1200W (1600W on larger models)
    등록된 상품이 없습니다.


    상품상세정보 상품문의 상품후기 교환및반품정보 배송안내 관련상품
    즐겨찾기
    배송안내
    배송조회
    1:1문의
    견적문의
    자료실
    블로그
    Top